日本高清不卡中文字幕-一起草草视频在线观看-亚洲精品一区二区三区色-国产亚洲精品免费视频

/**************************************************************************//** * @file main.c * @version V3.00 * $Revision: 2 $ * $Date: 15/09/02 10:03a $ * @brief Demonstrate how to set GPIO pin mode and use pin data input/output control. * @note * Copyright (C) 2013~2015 Nuvoton Technology Corp. All rights reserved. * ******************************************************************************/#include "stdio.h"#include "M451Series.h"#include "NuEdu-Basic01.h"

#define PLL_CLOCK 72000000

void SYS_Init(void){ /*---------------------------------------------------------------------------------------------------------*/ /* Init System Clock */ /*---------------------------------------------------------------------------------------------------------*/

/* Enable HIRC clock (Internal RC 22.1184MHz) */
CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk);

/* Wait for HIRC clock ready */ CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk);

/* Select HCLK clock source as HIRC and and HCLK clock divider as 1 */
CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1));

/* Enable HXT clock (external XTAL 12MHz) */ CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk);

/* Wait for HXT clock ready */
CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk);

/* Set core clock as PLL_CLOCK from PLL */ CLK_SetCoreClock(PLL_CLOCK);

/* Enable UART module clock */
CLK_EnableModuleClock(UART0_MODULE);

/* Select UART module clock source as HXT and UART module clock divider as 1 */ CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HXT, CLK_CLKDIV0_UART(1));

/*---------------------------------------------------------------------------------------------------------*/
/* Init I/O Multi-function */
/*---------------------------------------------------------------------------------------------------------*/

/* Set PD multi-function pins for UART0 RXD(PD.6) and TXD(PD.1) */ SYS->GPD_MFPL &= ~(SYS_GPD_MFPL_PD6MFP_Msk | SYS_GPD_MFPL_PD1MFP_Msk); SYS->GPD_MFPL |= (SYS_GPD_MFPL_PD6MFP_UART0_RXD | SYS_GPD_MFPL_PD1MFP_UART0_TXD);

}

void UART0_Init(){ /*---------------------------------------------------------------------------------------------------------*/ /* Init UART */ /*---------------------------------------------------------------------------------------------------------*/ /* Reset UART module */ SYS_ResetModule(UART0_RST);

/* Configure UART0 and set UART0 baud rate */
UART_Open(UART0, 115200);
}

/*---------------------------------------------------------------------------------------------------------*//* Main Function *//*---------------------------------------------------------------------------------------------------------*/int32_t main(void){ uint32_t temp,temp1 = 0; /* Unlock protected registers */ SYS_UnlockReg();

/* Init System, peripheral clock and multi-function I/O */
SYS_Init();

/* Lock protected registers */ SYS_LockReg();

/* Init UART0 for printf */
UART0_Init();

printf("\nNuEdu-SDK-M451 PWM-DAC\n");

Initial_PWM_LED();
Initial_PWM_DAC();
Initial_LED();
Open_ADC_Knob();
Write_PWMDAC(1,temp1);

while(1)
{
        //Get Volume Knob Data
        temp = Get_ADC_PWMDAC(); //Volume Range: 0 ~ 4095
Write_LED_Bar((temp * (8 + 1) / 4096));
Write_PWMDAC(1,temp1++);
if(temp1>100)
temp1 = 0;
CLK_SysTickDelay(10000);
}
}

#include <stdio.h>
#include "M451Series.h"
#include "NuEdu-Basic01_PWMDAC.h"


void Write_PWMDAC(unsigned char Enable, unsigned char ch0_dut)
{
    /* set PWMB channel 0 output configuration */
    PWM_ConfigOutputChannel(PWM1, 4, 1000, ch0_dut);

    // Start PWM COUNT
    PWM_Start(PWM1, 1 << 4);

    if(Enable == 0)
        /* Enable PWM Output path for PWMB channel 0 */
        PWM_DisableOutput(PWM1, 1 << 4);
    else
        /* Diable PWM Output path for PWMB channel 0 */
        PWM_EnableOutput(PWM1, 1 << 4);
}


void Initial_PWM_DAC(void)
{
    GPIO_SetMode(PC, BIT13, GPIO_MODE_INPUT); //avoid to pwm dac out
    SYS->GPC_MFPH &= ~SYS_GPC_MFPH_PC13MFP_Msk ;
    SYS->GPC_MFPH |= SYS_GPC_MFPH_PC13MFP_PWM1_CH4;

    /* Enable PWM module clock */
    CLK_EnableModuleClock(PWM1_MODULE);

    /* Select PWM module clock source */
    CLK_SetModuleClock(PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0);

    /* Reset PWM1 channel 0~5 */
    SYS_ResetModule(PWM1_RST);
}

/**************************************************************************//**
 * @file     NuEdu-NuEdu-Basic01_RGBLED.c
 * @version  V1.00
 * $Revision: 5 $
 * $Date: 15/09/02 10:02a $
 * @brief    NuEdu-Basic01_RGBLED driver source file for NuEdu-SDK-M451 
 *
 * @note
 * Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include <stdio.h>
#include "M451Series.h"
#include "NuEdu-Basic01_RGBLED.h"

/** @addtogroup M451_Library M451 Library
  @{
*/

/** @addtogroup NuEdu-SDK-M451_Basic01 M451_Basic01 Library
  @{
*/

/** @addtogroup M451_Basic01_FUNCTIONS RGB LED Functions
  @{
*/

/**
 * @brief       Set multi-function pins for PWM1 channel 0,1,2
 * @return      None
 */
void Initial_PWM_LED(void)
{
    /* Set PC9~PC11 multi-function pins for PWM1 Channel0~2  */
    SYS->GPC_MFPH &= ~(SYS_GPC_MFPH_PC9MFP_Msk | SYS_GPC_MFPH_PC10MFP_Msk | SYS_GPC_MFPH_PC11MFP_Msk);
    SYS->GPC_MFPH |= SYS_GPC_MFPH_PC9MFP_PWM1_CH0 | SYS_GPC_MFPH_PC10MFP_PWM1_CH1 | SYS_GPC_MFPH_PC11MFP_PWM1_CH2;

    /* Enable PWM module clock */
    CLK_EnableModuleClock(PWM1_MODULE);

    /* Select PWM module clock source */
    CLK_SetModuleClock(PWM1_MODULE, CLK_CLKSEL2_PWM1SEL_PCLK1, 0);

    /* Reset PWM1 channel 0~5 */
    SYS_ResetModule(PWM1_RST);
}

/**
 * @brief       Set PWM clock enable and HCLK as PWM clock source,
  *
 * @param[in]   ch        Channel numbers that will be enabled.
 *                                    
 * @param[in]   ch0_fre        Channel 0 frequency.
 *                                    
 * @param[in]   ch0_dut        Channel 0 duty.
 *
 * @param[in]   ch1_fre        Channel 1 frequency.
 *                                    
 * @param[in]   ch1_dut        Channel 1 duty.
 *
 * @param[in]   ch2_fre        Channel 2 frequency.
 *                                    
 * @param[in]   ch2_dut        Channel 2 duty.
 *
 * @return      None
 */
void PWM_LED(unsigned char ch, unsigned int ch0_fre, unsigned int ch0_dut, unsigned int ch1_fre, unsigned int ch1_dut, unsigned int ch2_fre, unsigned int ch2_dut)
{
    /* set PWMA channel 1 output configuration */
    PWM_ConfigOutputChannel(PWM1, 0, ch0_fre, ch0_dut);
    PWM_ConfigOutputChannel(PWM1, 1, ch1_fre, ch1_dut);
    PWM_ConfigOutputChannel(PWM1, 2, ch2_fre, ch2_dut);

    /* Enable PWM Output path for PWMA channel 0 */
    PWM_EnableOutput(PWM1, ch);

    // Start
    PWM_Start(PWM1, ch);
}

/*@}*/ /* end of group M451_Basic01_FUNCTIONS */

/*@}*/ /* end of group NuEdu-SDK-M451_Basic01 */

/*@}*/ /* end of group M451_Library */

/*** (C) COPYRIGHT 2013~2015 Nuvoton Technology Corp. **/

uint32_t PWM_ConfigCaptureChannel(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32UnitTimeNsec, uint32_t u32CaptureEdge)
{
    uint32_t u32Src;
    uint32_t u32PWMClockSrc;
    uint32_t u32NearestUnitTimeNsec;
    uint16_t u16Prescale = 1, u16CNR = 0xFFFF;

    if(pwm == PWM0)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM0SEL_Msk;
    else//(pwm == PWM1)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM1SEL_Msk;

    if(u32Src == 0)
    {
        //clock source is from PLL clock
        u32PWMClockSrc = CLK_GetPLLClockFreq();
    }
    else
    {
        //clock source is from PCLK
        SystemCoreClockUpdate();
        u32PWMClockSrc = SystemCoreClock;
    }

    u32PWMClockSrc /= 1000;
    for(u16Prescale = 1; u16Prescale <= 0x1000; u16Prescale++)
    {
        u32NearestUnitTimeNsec = (1000000 * u16Prescale) / u32PWMClockSrc;
        if(u32NearestUnitTimeNsec < u32UnitTimeNsec)
        {
            if(u16Prescale == 0x1000)  //limit to the maximum unit time(nano second)
                break;
            if(!((1000000 * (u16Prescale + 1) > (u32NearestUnitTimeNsec * u32PWMClockSrc))))
                break;
            continue;
        }
        break;
    }

    // convert to real register value
    // every two channels share a prescaler
    PWM_SET_PRESCALER(pwm, u32ChannelNum, --u16Prescale);

    // set PWM to down count type(edge aligned)
    (pwm)->CTL1 = ((pwm)->CTL1 & ~(PWM_CTL1_CNTTYPE0_Msk << (2 * u32ChannelNum))) | (1UL << (2 * u32ChannelNum));
    // set PWM to auto-reload mode
    (pwm)->CTL1 &= ~(PWM_CTL1_CNTMODE0_Msk << u32ChannelNum);
    PWM_SET_CNR(pwm, u32ChannelNum, u16CNR);

    return (u32NearestUnitTimeNsec);
}

/**
 * @brief This function Configure PWM generator and get the nearest frequency in edge aligned auto-reload mode
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelNum PWM channel number. Valid values are between 0~5
 * @param[in] u32Frequency Target generator frequency
 * @param[in] u32DutyCycle Target generator duty cycle percentage. Valid range are between 0 ~ 100. 10 means 10%, 20 means 20%...
 * @return Nearest frequency clock in nano second
 * @note Since every two channels, (0 & 1), (2 & 3), shares a prescaler. Call this API to configure PWM frequency may affect
 *       existing frequency of other channel.
 */
uint32_t PWM_ConfigOutputChannel(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Frequency, uint32_t u32DutyCycle)
{
    uint32_t u32Src;
    uint32_t u32PWMClockSrc;
    uint32_t i;
    uint16_t u16Prescale = 1, u16CNR = 0xFFFF;

    if(pwm == PWM0)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM0SEL_Msk;
    else//(pwm == PWM1)
        u32Src = CLK->CLKSEL2 & CLK_CLKSEL2_PWM1SEL_Msk;

    if(u32Src == 0)
    {
        //clock source is from PLL clock
        u32PWMClockSrc = CLK_GetPLLClockFreq();
    }
    else
    {
        //clock source is from PCLK
        SystemCoreClockUpdate();
        u32PWMClockSrc = SystemCoreClock;
    }

    for(u16Prescale = 1; u16Prescale < 0xFFF; u16Prescale++)//prescale could be 0~0xFFF
    {
        i = (u32PWMClockSrc / u32Frequency) / u16Prescale;
        // If target value is larger than CNR, need to use a larger prescaler
        if(i > (0x10000))
            continue;

        u16CNR = i;
        break;
    }
    // Store return value here 'cos we're gonna change u16Prescale & u16CNR to the real value to fill into register
    i = u32PWMClockSrc / (u16Prescale * u16CNR);

    // convert to real register value
    // every two channels share a prescaler
    PWM_SET_PRESCALER(pwm, u32ChannelNum, --u16Prescale);
    // set PWM to down count type(edge aligned)
    (pwm)->CTL1 = ((pwm)->CTL1 & ~(PWM_CTL1_CNTTYPE0_Msk << (2 * u32ChannelNum))) | (1UL << (2 * u32ChannelNum));
    // set PWM to auto-reload mode
    (pwm)->CTL1 &= ~(PWM_CTL1_CNTMODE0_Msk << u32ChannelNum);

    PWM_SET_CNR(pwm, u32ChannelNum, --u16CNR);
    if(u32DutyCycle)
    {
        PWM_SET_CMR(pwm, u32ChannelNum, u32DutyCycle * (u16CNR + 1) / 100 - 1);
        (pwm)->WGCTL0 &= ~((PWM_WGCTL0_PRDPCTL0_Msk | PWM_WGCTL0_ZPCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL0 |= (PWM_OUTPUT_LOW << (u32ChannelNum * 2 + PWM_WGCTL0_PRDPCTL0_Pos));
        (pwm)->WGCTL1 &= ~((PWM_WGCTL1_CMPDCTL0_Msk | PWM_WGCTL1_CMPUCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL1 |= (PWM_OUTPUT_HIGH << (u32ChannelNum * 2 + PWM_WGCTL1_CMPDCTL0_Pos));
    }
    else
    {
        PWM_SET_CMR(pwm, u32ChannelNum, 0);
        (pwm)->WGCTL0 &= ~((PWM_WGCTL0_PRDPCTL0_Msk | PWM_WGCTL0_ZPCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL0 |= (PWM_OUTPUT_LOW << (u32ChannelNum * 2 + PWM_WGCTL0_ZPCTL0_Pos));
        (pwm)->WGCTL1 &= ~((PWM_WGCTL1_CMPDCTL0_Msk | PWM_WGCTL1_CMPUCTL0_Msk) << (u32ChannelNum * 2));
        (pwm)->WGCTL1 |= (PWM_OUTPUT_HIGH << (u32ChannelNum * 2 + PWM_WGCTL1_CMPDCTL0_Pos));
    }

    return(i);
}

/**
 * @brief Start PWM module
 * @param[in] pwm The pointer of the specified PWM module
 *                - PWM0 : PWM Group 0
 *                - PWM1 : PWM Group 1
 * @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel.
 *                           Bit 0 is channel 0, bit 1 is channel 1...
 * @return None
 * @details This function is used to start PWM module.
 */
void PWM_Start(PWM_T *pwm, uint32_t u32ChannelMask)
{
    (pwm)->CNTEN |= u32ChannelMask;
}